260(1)An employer shall appoint a person to make an examination, using non-destructive methods, to determine the condition of the
(a)
mine hoist shafting, brake pins and linkages, and
(b)
structural parts, attachment pins and drawbars of a shaft conveyance and counterweight.
260(2)An employer shall ensure that a person appointed under subsection (1) is competent.
260(3)A person appointed under subsection (1) shall perform an examination to determine the condition of the parts referred to in paragraphs (1)(a) and (b)
(a)
before first use of the parts, and
(b)
at regular intervals, as determined by the person or as required by an officer.
260(4)An employer shall ensure that drawings of the parts to be examined under subsection (1) are made available to the competent person performing the examination.
260(1)An employer shall appoint a person to make an examination, using non-destructive methods, to determine the condition of the
(a)
mine hoist shafting, brake pins and linkages, and
(b)
structural parts, attachment pins and drawbars of a shaft conveyance and counterweight.
260(2)An employer shall ensure that a person appointed under subsection (1) is competent.
260(3)A person appointed under subsection (1) shall perform an examination to determine the condition of the parts referred to in paragraphs (1)(a) and (b)
(a)
before first use of the parts, and
(b)
at regular intervals, as determined by the person or as required by an officer.
260(4)An employer shall ensure that drawings of the parts to be examined under subsection (1) are made available to the competent person performing the examination.