Acts and Regulations

91-191 - General

Section 232
Disposition versions

Full text
Aerial device
232(1)An aerial device shall
(a) conform with CSA standard C225-M88, “Vehicle-Mounted Aerial Devices”, or
(b) be certified in writing by an engineer as being safe to elevate personnel to a work area above ground level.
232(2)If an employee is required to work from a moving boom supported elevating work platform or a moving aerial device, the employer shall provide and the employee shall continually use a fall-arresting system.
232(3)The fall-arresting system referred to in subsection (2) shall be attached to:
(a) an anchor point provided by the manufacturer; or
(b) an anchor point that is approved by an engineer and secured to the upper boom of the platform or aerial device.
97-121; 2010-159; 2020-35; 2022-27
Aerial device
232(1)An aerial device shall
(a) conform with CSA standard C225-M88, “Vehicle-Mounted Aerial Devices”, or
(b) be certified in writing by an engineer as being safe to elevate personnel to a work site above ground level.
232(2)If an employee is required to work from a moving boom supported elevating work platform or a moving aerial device, the employer shall provide and the employee shall continually use a fall-arresting system.
232(3)The fall-arresting system referred to in subsection (2) shall be attached to:
(a) an anchor point provided by the manufacturer; or
(b) an anchor point that is approved by an engineer and secured to the upper boom of the platform or aerial device.
97-121; 2010-159; 2020-35
Aerial device
232(1)An aerial device shall
(a) conform with CSA standard C225-M88, “Vehicle-Mounted Aerial Devices”, or
(b) be certified in writing by an engineer as being safe to elevate personnel to a work site above ground level.
232(2)If an employee is required to work from a moving boom supported elevating work platform or a moving aerial device, the employer shall provide and the employee shall continually use a fall-arresting system.
232(3)The fall-arresting system referred to in subsection (2) shall be attached to:
(a) an anchor point provided by the manufacturer; or
(b) an anchor point that is approved by an engineer and secured to the upper boom of the platform or aerial device.
97-121; 2010-159
Aerial device
232(1)An aerial device shall
(a) conform with CSA standard CAN/CSA-C225-M88, “Vehicle-Mounted Aerial Devices”, or
(b) be certified in writing by an engineer as being safe to elevate personnel to a work site above ground level.
232(2)Where an employee is required to work from the bucket of an aerial device that is more than 3 m above a safe working level, the employee shall use an individual fall-arresting system that is securely anchored to the upper boom of the aerial device.
97-121