Acts and Regulations

91-191 - General

Section 213.21
Disposition versions

Full text
Inspection and certification
213.21(1)An employer shall ensure that a mobile crane is inspected every twelve months by an engineer or a competent person who is supervised by an engineer.
213.21(2)An engineer referred to in subsection (1) shall certify in writing that the inspection complies with the requirements of subsection (4) and that the crane is in safe working order.
213.21(3)A certification under subsection (2) shall provide details on the conditions under which the mobile crane was inspected.
213.21(4)An engineer referred to in subsection (1) shall ensure that the inspection under subsection (1), including a visual weld inspection, is conducted in accordance with the requirements of clause 5.3.5.2.1 of CSA standard Z150-20, “Safety code on mobile cranes” or a standard offering equivalent or better protection.
213.21(5)An employer may accept a certification from an engineer in another jurisdiction with respect to a mobile crane if the crane has been inspected and certified in that jurisdiction in accordance with subsection (2) and the certification would otherwise be valid under this section.
213.21(6)An employer shall ensure that a copy of the certification provided under this section is accessible to the operator when in the cab and is available to an officer on request.
213.21(7)An employer shall ensure that a mobile crane that
(a) does not have a certification that meets the requirements of subsection (2), is inspected and certified under this section no later than twelve months after the commencement of this provision, and
(b) has a certification that meets the requirements of subsection (2), is inspected and certified no later than twelve months after the date of the certification.
2001-33; 2020-35; 2022-79
Inspection and certification
213.21(1)An employer shall ensure that a mobile crane is inspected every twelve months by an engineer or a competent person who is supervised by an engineer.
213.21(2)An engineer referred to in subsection (1) shall certify in writing that the inspection complies with the requirements of subsection (4) and that the crane is in safe working order.
213.21(3)A certification under subsection (2) shall provide details on the conditions under which the mobile crane was inspected.
213.21(4)An engineer referred to in subsection (1) shall ensure that the inspection under subsection (1), including a visual weld inspection, is conducted in accordance with the requirements of clause 4.3.5.1 of CSA standard Z150-98, “Safety Code on Mobile Cranes”.
213.21(5)An employer may accept a certification from an engineer in another jurisdiction with respect to a mobile crane if the crane has been inspected and certified in that jurisdiction in accordance with subsection (2) and the certification would otherwise be valid under this section.
213.21(6)An employer shall ensure that a copy of the certification provided under this section is accessible to the operator when in the cab and is available to an officer on request.
213.21(7)An employer shall ensure that a mobile crane that
(a) does not have a certification that meets the requirements of subsection (2), is inspected and certified under this section no later than twelve months after the commencement of this provision, and
(b) has a certification that meets the requirements of subsection (2), is inspected and certified no later than twelve months after the date of the certification.
2001-33; 2020-35
Inspection and certification
213.21(1)An employer shall ensure that a mobile crane is inspected every twelve months by an engineer or a competent person who is supervised by an engineer.
213.21(2)An engineer referred to in subsection (1) shall certify in writing that the inspection complies with the requirements of subsection (4) and that the crane is in safe working order.
213.21(3)A certification under subsection (2) shall provide details on the conditions under which the mobile crane was inspected.
213.21(4)An engineer referred to in subsection (1) shall ensure that the inspection under subsection (1), including a visual weld inspection, is conducted in accordance with the requirements of clause 4.3.5.1 of CSA standard Z150-98, “Safety Code on Mobile Cranes”.
213.21(5)An employer may accept a certification from an engineer in another jurisdiction with respect to a mobile crane if the crane has been inspected and certified in that jurisdiction in accordance with subsection (2) and the certification would otherwise be valid under this section.
213.21(6)An employer shall ensure that a copy of the certification provided under this section is accessible to the operator when in the cab and is available to an officer on request.
213.21(7)An employer shall ensure that a mobile crane that
(a) does not have a certification that meets the requirements of subsection (2), is inspected and certified under this section no later than twelve months after the commencement of this provision, and
(b) has a certification that meets the requirements of subsection (2), is inspected and certified no later than twelve months after the date of the certification.
2001-33