Acts and Regulations

91-191 - General

Section 207.2
Disposition versions

Full text
Inspection of swivel, hook and block assembly and hooknut of mobile crane manufactured before 2000
Repealed: 2022-79
2022-79
207.2Repealed: 2022-79
2001-33; 2020-35; 2022-79
Inspection of swivel, hook and block assembly and hooknut of mobile crane manufactured before 2000
207.2(1)This section applies to a mobile crane manufactured before 2000 that, before the commencement of this subsection, has not undergone an inspection of its swivel, hook and block assembly and hooknut in accordance with CSA standard Z150-98, “Safety Code on Mobile Cranes”.
207.2(2)Notwithstanding the time frame specified by clause 4.3.5.2 of CSA standard Z150-98, “Safety Code on Mobile Cranes” for an inspection of a swivel, hook and block assembly and hooknut, an employer and an owner of a mobile crane shall each ensure that a mobile crane undergoes an inspection in accordance with clause 4.3.5.2 of CSA standard Z150-98, “Safety Code on Mobile Cranes” no later than December 31st of the year
(a) 2001, if the crane was manufactured before 1970,
(b) 2002, if the crane was manufactured after 1970 and before 1980,
(c) 2003, if the crane was manufactured after 1980 and before 1990, and
(d) 2004, if the crane was manufactured after 1990 and before 2000.
207.2(3)After an inspection under this section, an employer and an owner of a mobile crane shall ensure that subsequent inspections of its swivel, hook and block assembly and hooknut comply with the requirements of CSA standard Z150-98, “Safety Code on Mobile Cranes”.
2001-33; 2020-35
Inspection of swivel, hook and block assembly and hooknut of mobile crane manufactured before 2000
207.2(1)This section applies to a mobile crane manufactured before 2000 that, before the commencement of this subsection, has not undergone an inspection of its swivel, hook and block assembly and hooknut in accordance with CSA standard Z150-98, “Safety Code on Mobile Cranes”.
207.2(2)Notwithstanding the time frame specified by clause 4.3.5.2 of CSA standard Z150-98, “Safety Code on Mobile Cranes” for an inspection of a swivel, hook and block assembly and hooknut, an employer and an owner of a mobile crane shall each ensure that a mobile crane undergoes an inspection in accordance with clause 4.3.5.2 of CSA standard Z150-98, “Safety Code on Mobile Cranes” no later than December 31st of the year
(a) 2001, if the crane was manufactured before 1970,
(b) 2002, if the crane was manufactured after 1970 and before 1980,
(c) 2003, if the crane was manufactured after 1980 and before 1990, and
(d) 2004, if the crane was manufactured after 1990 and before 2000.
207.2(3)After an inspection under this section, an employer and an owner of a mobile crane shall ensure that subsequent inspections of its swivel, hook and block assembly and hooknut comply with the requirements of CSA standard Z150-98, “Safety Code on Mobile Cranes”.
2001-33
Inspection of swivel, hook and block assembly and hooknut of mobile crane manufactured before 2000
207.2(1)This section applies to a mobile crane manufactured before 2000 that, before the commencement of this subsection, has not undergone an inspection of its swivel, hook and block assembly and hooknut in accordance with CSA standard Z150-98, “Safety Code on Mobile Cranes”.
207.2(2)Notwithstanding the time frame specified by clause 4.3.5.2 of CSA standard Z150-98, “Safety Code on Mobile Cranes” for an inspection of a swivel, hook and block assembly and hooknut, an employer and an owner of a mobile crane shall each ensure that a mobile crane undergoes an inspection in accordance with clause 4.3.5.2 of CSA standard Z150-98, “Safety Code on Mobile Cranes” no later than December 31st of the year
(a) 2001, if the crane was manufactured before 1970,
(b) 2002, if the crane was manufactured after 1970 and before 1980,
(c) 2003, if the crane was manufactured after 1980 and before 1990, and
(d) 2004, if the crane was manufactured after 1990 and before 2000.
207.2(3)After an inspection under this section, an employer and an owner of a mobile crane shall ensure that subsequent inspections of its swivel, hook and block assembly and hooknut comply with the requirements of CSA standard Z150-98, “Safety Code on Mobile Cranes”.
2001-33