Acts and Regulations

91-191 - General

Section 207.1
Disposition versions

Full text
Inspection of telescopic boom of mobile crane manufactured before 1995
Repealed: 2022-79
2022-79
207.1Repealed: 2022-79
2001-33; 2020-35; 2022-79
Inspection of telescopic boom of mobile crane manufactured before 1995
207.1(1)This section applies to a mobile crane manufactured before 1995 that, before the commencement of this subsection, has not undergone a complete structural inspection of its telescopic boom in accordance with CSA standard Z150-98, “Safety Code on Mobile Cranes”.
207.1(2)Notwithstanding the time frame specified in clause 4.3.2.2(d) of CSA standard Z150-98, “Safety Code on Mobile Cranes” for an inspection of a telescopic boom, an employer and an owner of a mobile crane shall each ensure that a mobile crane undergoes a complete structural inspection of its telescopic boom in accordance with CSA standard Z150-98, “Safety Code on Mobile Cranes” in accordance with the following time frame:
(a) when the boom is disassembled, if it is disassembled before the date specified in paragraph (b) applicable to the year of manufacture of the crane; or
(b) no later than December 31st of the year
(i) 2001, if the crane was manufactured before 1970,
(ii) 2002, if the crane was manufactured after 1970 and before 1973,
(iii) 2003, if the crane was manufactured after 1973 and before 1977,
(iv) 2004, if the crane was manufactured after 1977 and before 1980,
(v) 2005, if the crane was manufactured after 1980 and before 1990, and
(vi) 2006, if the crane was manufactured after 1990 and before 1995.
207.1(3)After an inspection under this section, an employer and an owner of a mobile crane shall ensure that subsequent inspections comply with the requirements of CSA standard Z150-98, “Safety Code on Mobile Cranes”.
2001-33; 2020-35
Inspection of telescopic boom of mobile crane manufactured before 1995
207.1(1)This section applies to a mobile crane manufactured before 1995 that, before the commencement of this subsection, has not undergone a complete structural inspection of its telescopic boom in accordance with CSA standard Z150-98, “Safety Code on Mobile Cranes”.
207.1(2)Notwithstanding the time frame specified in clause 4.3.2.2(d) of CSA standard Z150-98, “Safety Code on Mobile Cranes” for an inspection of a telescopic boom, an employer and an owner of a mobile crane shall each ensure that a mobile crane undergoes a complete structural inspection of its telescopic boom in accordance with CSA standard Z150-98, “Safety Code on Mobile Cranes” in accordance with the following time frame:
(a) when the boom is disassembled, if it is disassembled before the date specified in paragraph (b) applicable to the year of manufacture of the crane; or
(b) no later than December 31st of the year
(i) 2001, if the crane was manufactured before 1970,
(ii) 2002, if the crane was manufactured after 1970 and before 1973,
(iii) 2003, if the crane was manufactured after 1973 and before 1977,
(iv) 2004, if the crane was manufactured after 1977 and before 1980,
(v) 2005, if the crane was manufactured after 1980 and before 1990, and
(vi) 2006, if the crane was manufactured after 1990 and before 1995.
207.1(3)After an inspection under this section, an employer and an owner of a mobile crane shall ensure that subsequent inspections comply with the requirements of CSA standard Z150-98, “Safety Code on Mobile Cranes”.
2001-33