Accueil
English
Lois et règlements
2014-96
- Boiler and Pressure Vessel Act
Table des matières
Loi habilitante
0
Texte intégral
NEW BRUNSWICK
REGULATION 2014-96
under the
Boiler and Pressure Vessel Act
(O.C. 2014-286)
Filed August 12, 2014
1
The enacting clause of New Brunswick Regulation 84-174 under the Boiler and Pressure Vessel Act is repealed and the following is substituted:
Under section 40 of the
Boiler and Pressure Vessel Act
, the Lieutenant-Governor in Council makes the following Regulation:
2
The heading “AGE LIMIT FOR RIVETED HIGH PRESSURE BOILERS (LAP SEAM)” preceding section 108 of the Regulation is repealed.
3
Section 108 of the Regulation is repealed.
4
The heading “LIQUEFIED PETROLEUM GAS PRESSURE VESSELS” preceding section 109 of the Regulation is repealed.
5
Section 109 of the Regulation is repealed.
6
Subsection 111(3) of the Regulation is amended by striking out “shall hold an ASME Certificate of Authorization,”.
7
Section 114 of the Regulation is amended by striking out “shall obtain a certificate of inspection in respect of the boiler or pressure vessel and”.
8
The heading “SPACE FOR REGISTRATION STAMP” preceding section 304 of the Regulation is repealed.
9
Section 304 of the Regulation is repealed.
10
The heading “FORMS SUPPLIED BY DEPARTMENT” preceding section 305 of the Regulation is repealed.
11
Section 305 of the Regulation is repealed.
12
Subsection 307(1) of the Regulation is amended by striking out “and boilers and pressure vessels may be manufactured in any number to such registered designs” and substituting
“to allow boilers and pressure vessels to be manufactured in any number in accordance with the registered designs”
.
13
Section 308 of the Regulation is amended by striking out “and no further construction using the design shall be commenced”.
14
Section 309 of the Regulation is amended by striking out “and shall revise the design to meet the approval of the Chief Inspector”.
15
Section 311 of the Regulation is repealed and the following is substituted:
REJECTED DESIGNS
311
If a design does not meet with the approval of the Chief Inspector or of a design review organization approved by the Chief Inspector, a report setting out the reasons why the design does not meet with the approval of the Chief Inspector or of the design review organization shall be sent by the Chief Inspector or the design review organization to the manufacturer.
16
Section 317 of the Regulation is amended by striking out “listing each item to be registered and indicating that such items” and substituting
“indicating that all the items listed in the catalogue”
.
17
Subsection 319(1) of the Regulation is amended by striking out “, except condensers, which may be located exterior to the building”.
18
Section 320 of the Regulation is amended by striking out “, which shall be paid”.
19
Section 503 of the Regulation is amended
(
a
)
by repealing subsection (3);
(
b
)
by repealing subsection (4).
20
Subsection 512(2) of the Regulation is repealed.
21
Section 602 of the Regulation is amended
(
a
)
in subsection (2) by striking out “fabrication, construction, installation and operation” and substituting
“fabrication and installation”
;
(
b
)
by repealing subsection (3).
22
This Regulation comes into force on October 1, 2014.
Copier
Sélectionner cet élément
Sélectionner l'élément parent
Désélectionner tous les éléments
Copier vers Rédaction
Copier vers LAW
Copier vers le presse-papier
Pour copier : Ctrl+C
0
Recherche avancée (versions antérieures)
Lois et règlements codifiés
Lois
par titre
par chapitre
par ministère
Règlements
par numéro de règlement
Lois et règlements annuels
Lois
par année
Règlements
par année
Accès aux Règles de procédure
par numéro de règle
Documents abrogés (à compter de 2011)
Lois
par titre
Sélections
Afficher
Les sélections du document courant
Toutes les sélections de la collection
Fragments sélectionnés
Supprimer toutes les sélections
Afficher les sélections
Cyberlex
Version 2.2.4.0