40(1)On a project site, an employee shall use Class E, Type 2 headwear that conforms to CSA standard CSA Z94.1-15, “Industrial protective headwear – Performance, selection, care, and use” or a standard offering equivalent or better protection.

40(2)At a place of employment, other than a project site, where an employee is exposed to a hazard that may injure the employee’s head, the employee shall use protective equipment that is appropriate to the hazard and that conforms to CSA standard CSA Z94.1-15, “Industrial protective headwear – Performance, selection, care, and use” or a standard offering equivalent or better protection.

40(3)An employer shall provide the safety headwear referred to in subsections (1) and (2) to employees and shall ensure that the employees wear the headwear.

40(4)The safety headwear shall be equipped with a retention system to secure the safety headwear to the employee’s head when the employee is working in conditions that may cause loss of the headwear.

40(1)On a project site, an employee shall use Class E, Type 2 headwear that conforms to CSA standard CSA Z94.1-15, “Industrial protective headwear – Performance, selection, care, and use” or a standard offering equivalent or better protection.

40(2)At a place of employment, other than a project site, where an employee is exposed to a hazard that may injure the employee’s head, the employee shall use protective equipment that is appropriate to the hazard and that conforms to CSA standard CSA Z94.1-15, “Industrial protective headwear – Performance, selection, care, and use” or a standard offering equivalent or better protection.

40(1)On a project site, an employee shall use Class E, Type 1 headwear that conforms to CSA standard CSA Z94.1-15, “Industrial protective headwear – Performance, selection, care, and use” or a standard offering equivalent or better protection.

40(2)At a place of employment, other than a project site, where an employee is exposed to a hazard that may injure the employee’s head, the employee shall use protective equipment that is appropriate to the hazard and that conforms to CSA standard CSA Z94.1-15, “Industrial protective headwear – Performance, selection, care, and use” or a standard offering equivalent or better protection.

40(1)On a project site, an employee shall use Class E, Type 1 headwear that conforms to ANSI standard ANSI Z89.1-1997, “American National Standard for Industrial Head Protection” or a standard offering equivalent or better protection.

40(2)At a place of employment, other than a project site, where an employee is exposed to a hazard that may injure the employee’s head, the employee shall use protective equipment that is appropriate to the hazard and that conforms to ANSI standard ANSI Z89.1-1997, “American National Standard for Industrial Head Protection” or a standard offering equivalent or better protection.