7(1)Subject to this section, unless it is prepared in book form for deposit, a debenture shall be printed or typewritten on good quality white paper, 8.5 inches by 11 inches (22.6 cm by 27.94 cm) or 8.5 inches by 14 inches (22.6 cm by 35.6 cm), with a margin of not less than 1 inch (2.5 cm) on the top and left side of the page and, if printed on the reverse thereof, a margin of not less than one inch (2.5 cm) on the top and right side of the page, and shall be of sufficient clarity to permit photocopying or other reproduction.

7(2)Subsection (1) applies to all attachments to instruments referred to therein other than plans, instruments issued by a court, instruments and documents requiring registration under the Bankruptcy Act (Canada), instruments and documents prepared in book form for deposit and such other attached instruments and documents as, in the opinion of the registrar, are suitable for acceptance in a form other than that prescribed in subsection (1).

7(3)If an instrument is to be filed or registered under the Act by submitting a digitally scanned image of the instrument, the digitally scanned image shall be of sufficient clarity to be readable when reproduced.

7(4)If an instrument with a crimped or raised seal affixed to it is to be filed or registered under the Act by submitting a digitally scanned image of the instrument, the seal must be darkened or otherwise sufficiently enhanced so that the seal may be identified.

7(5)A registrar may refuse to file or register an instrument,

7(1)Unless it is prepared in book form for deposit, a debenture made after the coming into force of this Regulation shall be printed or typewritten on good quality white paper, 8.5 inches by 14 inches (22.6 cm by 35.6 cm), with a margin of not less than 1.5 inches (3.8 cm) on the top and left side of the page and, if printed on the reverse thereof, a margin of not less than 1.5 inches (3.8 cm) on the top and right side of the page, and shall be of sufficient clarity to permit photocopying and microfilming on registry office equipment.

7(2)Subsection (1) applies to all attachments to instruments referred to therein other than plans, instruments issued by a court, instruments and documents requiring registration under the Bankruptcy Act (Canada), instruments and documents prepared in book form for deposit and such other attached instruments and documents as, in the opinion of the registrar, are suitable for acceptance in a form other than that prescribed in subsection (1).

7(1)Unless it is prepared in book form for deposit, a debenture made after the coming into force of this Regulation shall be printed or typewritten on good quality white paper, 8.5 inches by 14 inches (22.6 cm by 35.6 cm), with a margin of not less than 1.5 inches (3.8 cm) on the top and left side of the page and, if printed on the reverse thereof, a margin of not less than 1.5 inches (3.8 cm) on the top and right side of the page, and shall be of sufficient clarity to permit photocopying and microfilming on registry office equipment.

7(2)Subsection (1) applies to all attachments to instruments referred to therein other than plans, instruments issued by a court, instruments and documents requiring registration under the Bankruptcy Act (Canada), instruments and documents prepared in book form for deposit and such other attached instruments and documents as, in the opinion of the registrar, are suitable for acceptance in a form other than that prescribed in subsection (1).