Acts and Regulations

2011-74 - Clean Environment Act

Table of contents
Full text
NEW BRUNSWICK
REGULATION 2011-74
under the
Clean Environment Act
(O.C. 2011-369)
Filed December 20, 2011
1Section 5 of New Brunswick Regulation 82-126 under the Clean Environment Act is amended
(a) by repealing subsection (4) and substituting the following:
5(4)Notwithstanding section 3 and subject to subsection (5), no approval is required under this Regulation for
(a) the repair or replacement of a broken water or wastewater pipe,
(b) the replacement, upgrading, modification or extension of a water or wastewater pipe, including any associated valves,
(c) the installation of a service connection, including the tapping of a water or wastewater main for that purpose,
(d) the construction of a potable water pumping facility, or
(e) the replacement, upgrading, repair or modification of a potable water pumping facility.
(b) by adding after subsection (4) the following:
5(5)If a water or wastewater pipe is to be replaced, upgraded, modified or extended or a potable water pumping facility is to be constructed, replaced, upgraded or modified,
(a) the construction, replacement, upgrading, modification or extension, as the case may be, shall be undertaken pursuant to the specifications and drawings prepared by an engineer and affixed with his or her seal,
(b) drawings of record prepared by an engineer and affixed with his or her seal shall be completed within ninety days of the completion of the construction, replacement, upgrading, modification or extension, and
(c) an engineer referred to in paragraph (a) or (b) shall be a member of the Association of Professional Engineers and Geoscientists of New Brunswick or licensed to practise engineering under the Engineering and Geoscience Professions Act.