40.1(1)For the purpose of subsection 229.1(1) of the Act, the minimum tread depth for a motorcycle tire is at least 1.6 mm (1/16 in.) of tread remaining when measured in any major tread groove on the tire.
40.1(2)The following motorcycle tire conditions are prescribed for the purpose of subsection 229.1(2) of the Act:
(a)
any cracks, cuts, scuffs or snags in excess of 2.54 cm (1 in.) that expose body cords in the tread area;
(b)
any cracks, cuts, scuffs or snags in the sidewall of the tire to the extent that body cords are damaged or exposed;
(c)
any bumps, bulges or lumps indicating separation of the tread, sidewall or bead area;
(d)
a noticeable air leak;
(e)
tread no longer evident in cupped area;
(f)
visible breaks, boots, blowout patches;
(g)
a repair consisting of a plug in the tire sidewall; and
(h)
any markings indicating that the tire is not for highway use.