Acts and Regulations

84-190 - Instrument Standards

Full text
NEW BRUNSWICK
REGULATION 84-190
under the
Registry Act
(O.C. 84-622)
Filed July 26, 1984
Under subsection 71(2) of the Registry Act, the Lieutenant-Governor in Council makes the following Regulation:
1This Regulation may be cited as the Instrument Standards Regulation - Registry Act.
2(1)Unless it is prepared in book form for deposit, an instrument made after the coming into force of this Regulation shall be printed or typewritten on good quality white paper, 8.5 inches by 14 inches (22.6 centimetres by 35.6 centimetres), with a margin of not less than 1.5 inches (3.8 centimetres) on the top and left side of the page and, if printed on the reverse side thereof, a margin of not less than 1.5 inches (3.8 centimetres) on the top and right side of the page and shall be of sufficient clarity to permit photocopying and microfilming on registry office equipment.
2(2)Subsection (1) applies to all attachments to instruments referred to therein other than plans, instruments issued by a court, instruments and documents requiring registration under the Bankruptcy Act (Canada), instruments and documents prepared in book form for deposit and such other attached instruments and documents as, in the opinion of the registrar, are suitable for acceptance in a form other than that prescribed in subsection (1).
3New Brunswick Regulation 84-114 under the Registry Act is repealed.
4Sections 1 and 2 of this Regulation come into force on January 7, 1985.
N.B. This Regulation is consolidated to March 31, 1999.